Top Track Safety

The top track is the only item you need to attach to the wall with screws. There are cuts in the top track (that is the safety feature) where you hook the hang standards in to place and then slide them in to position. A screwdriver, drill and water level are good tools to have when you install the track.

Hang Standard

Hook as many hang standards on to the top track as you need. Plan 60-90 cm space between each standard, depending on what you will load the shelves with. The heavier, the less space you want between the standards.

Bracket for elfa Shelf and Shelf Basket

Hook the brackets in to the hang standards. They can be moved vertically with an interval of as little as 32 mm, which means that you can place your shelves and shelf baskets wherever you need them.

elfa Shelf

The elfa shelves are made of epoxy-treated wire and are available in 3 depths and 4 lengths. A 900-millimetre elfa shelf needs at least two brackets to support it, whereas an 1830-millimetre shelf requires a minimum of three brackets.

Fascia

A finish for an elfa-shelf.

Shelf Basket

The shelf basket is optimum storage for smaller clothing. It requires at least two of the brackets for elfa shelves and shelf baskets. Use the 305 mm deep brackets to install the shelf basket. Two shelf baskets can be joined together next to each other on one and the same bracket. Use the dividers on each end and/or use several dividers to divide the whole shelf basket into sections.

Divider for Shelf Basket

Use dividers to divide the shelf basket into sections or as ends for the sides.

Divider for Shelf Basket Translucent

Use dividers to divide the shelf basket into sections or as ends for the sides.

Gliding Drawer Frame

Snap the drawer frame into two brackets for elfa shelf or shelf basket. Both wire drawers and mesh drawers fit in the frame.

Next page